-
36" ID X 10" FF Style 1101LW lightweight rubber expansion joint
-
36" ID X 15" FF Style 1101LW cross-sectional detail
-
Style 1101LW assembly with W/B 2-rod control unit
-
72" ID X 16" FF Style 1101LW with INT-WB integral gusset/retaining ring control unit
-
Style 1101LW lightweight construction sample
![](https://general-rubber.com/wp-content/uploads/2023/07/1101LW-36-no-flng-image.jpg)
![](https://general-rubber.com/wp-content/uploads/2023/07/1101LW-36-Section-Detail-image.jpg)
![](https://general-rubber.com/wp-content/uploads/2023/07/1101LW-48WB-image.jpg)
![](https://general-rubber.com/wp-content/uploads/2023/07/1101LW-72INT-image.jpg)
![](https://general-rubber.com/wp-content/uploads/2023/07/1101LW-Catalog-Image-image.jpg)
Lightweight
![](https://general-rubber.com/wp-content/uploads/2023/07/general-rubber-mitusa.gif)
Style 1101LW
General Rubber’s Style 1101LW lightweight rubber expansion joints are designed with lower spring rates for reduced reaction forces and greater movement capabilities within a compact body. This optimally designed lightweight construction represents the most cost-effective arrangement for low pressure applications. The construction includes full rubber flanges, a high-grade leak-proof tube, a seamless cover, multiple layers of high-strength tire cord and hot dip galvanized steel retaining rings. Additionally, they are designed to absorb large all-directional movements, reduce noise and vibration, have a cycle life in the tens of millions, compensate for misalignments, provide access to piping and equipment and relieve pipe and anchor stresses.
Features
- Ideal flexible connector for fans, blowers and other industrial OEM Equipment
- High strength and simple to install
- Integral flange design, no gaskets required
- Hot dip galvanized retaining rings standard
- 25 PSIG with 6″ Hg standard design
- 250°F continuous service standard (400°F available)
- Virtually eliminates sediment buildup
- Available in multiple arch or offset arrangements and sizes not shown
- Standard or custom face-to-face dimensions
- Versatile hand-built construction
- Extremely flexible design with minimum stiffness and deflection forces